Hebei Beton Mesh Reinforcing

Slab Bolster

Slab Bolster is used for supporting lower slab steel from slab form. Legs are spaced 5" on center. It is available in 3/4" to 3" heights in 5'-0" lengths.

Slab bolster with plastic tip is used for supporting lower slab steel from slab form. Legs are spaced 5" on center. It is available in 3/4" to 3" heights in 5'-0" lengths.

Slab Bolster Upper

Slab Bolster upper is used for supporting one layer of steel above another and spacing them to required distance. Standard leg spacing is 5" on centers. Heights and lengths are same as slab bolsters. It is in standard 5'-0" lengths.

Slab Bolster with plate

Slab Bolster with plate is used for supporting lower slab steel on fill or other soft material. Details are the same as for standard slab bolster with the addition of a bearing plate. It is available in 5'-0" lengths only.

Reinforcing Welded Mesh

Reinforcing welded mesh is that the high tensile wires are welded into a rectangular mesh grid fabric. The reinforcing welded mesh is generally manufactured according to standard references making for easy site identification, quality control and management. The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process.

Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls.

Surface Treatment of Reinforcing Welded Mesh: Electro galvanized or hot-dipped galvanize.

Materials: Low carbon steel wire, stainless steel wire and rebar wire.

Characteristics: even surface, firm structure, precise opening etc. it has the good property of corrosion-resisting and oxidation-Resisting.

Usage: It is widely used on building, food, agriculture etc. For example, it is used on reinforced concrete construction, floor slabs reinforcement, brick wall reinforcement, floor warming etc.

 Beam Bolster

Beam Bolster is used to support lower beam steel from the slab form. All legs spaced 2-1/2" on centers. It is available in 3/4" to 5" heights in 5'-0" lengths.

Beam Bolster Upper

Beam Bolster upper is used to support successive layers of steel one above the other. Legs spaced 2-1/2" on centers in standard 5'-0" lengths.

Beam Bolster with Plate

Beam Bolster with Plate is used to support heavy bottom steel on soft material. Details are same as for standard beam bolster with the addition of a bearing plate. Its length is 5'-0" only.

Reinforcement Spacers 

Reinforcement Spacers, The steel-wire spacer's legs are protected with a film of plastic. Plastic-tipped bar chairs can be used in suspended slabs, beams, vertical walls and slab on ground applications.

Range of heights from 20mm to 360mm.

Ensures consistent placement of reinforcement in slabs.

Requires no adjustment after pouring of concrete.

Metal base.

Metal bases are round metal plates that support wire bar chairs on soft surfaces.

Prevents the wire spacer sinking into the ground.

 Reinforcement Tie Wire

Reinforcement Tie Wire is made of annealed wire for reinforcing steel. We offer various sizes of tie wire for concrete reinforcement.

Reinforcement Tie Wire is for binding, tying, fencing and other industrial uses. Tie wire is popularly used in the daily life and various industries to avoid frequent and repeated maintenances.